SpecificationsBack to Specifications

BMW 319

 

Date of manufacture 1934-1937
Bodywork type(s) Saloon, Cabriolet, Tourer, Limo /Cabriolet.
Engine Type Inline 6 cylinder
Capacity 1911cc
Bore x stroke 65mm x 96mm
Power 45bhp @3750rpm and 55bhp @ 4000rpm versions
Compression 5.6:1
Carburettors Type 45; 2, Solex 26 mm updraught.Type 55 ; 3 Solex 30 mm sidedraught
Valve design Overhead, 2 per cylinder
Valve gear Camshaft in block. Push rods, rocker s, tappets and springs
Electrics 6 volt
Transmission Clutch Dry single disc. Fichtel & Sachs, K 10 , 180 mm dia.
Gearbox ratios Hurth
1st 3.65 :1
2nd 2.22 :1
3rd 1.51:1
4th 1.00:1
Axle ratio 4.38
Synchromesh 3rd and 4th
Chassis Frame Lightweight “A”-frame with two longitudinal tubular members, with varying diameter from 90 mm to 60 mm dependant on load , and three rectangular cross members
Suspension Front: Transverse leaf spring with lower wishbones and integral single acting shock absorbers
Rear: Longitudinal leaf springs with rigid axle and lever arm double acting shock absorbers
Foot operated one shot central oil lubrication system
Steering Rack and pinion
Brakes Four wheel   Bendix cable
Handbrake, cable on rear wheels
Dimensions Wheelbase 2400mm
Track front/rear 1153/1220 or 1270 mm         ) depending on
Length/width 3900mm x 1440 or 1500 mm )   Type of Body
Tyres 5.25 x 16
General Fuel capacity 40 litres
Max speed 72 mph
Number produced 6646
Click image to enlarge, you can then click the left or right sides of the enlarged pic to scroll through the gallery images on this page.[Not a valid template]

Comments are closed.

Powered by WordPress. Designed by Woo Themes